Product Overview
Our Galvanised Commercial Pattern Thimbles are an economical component for creating reinforced eyes in wire rope loops. A thimble is an essential part of a wire rope assembly, as it supports the loop (eye) and protects the individual wire strands from being crushed or abraded when connected to a shackle or other fitting. The Hot Dip Galvanised finish provides good corrosion resistance, making these thimbles ideal for general-purpose outdoor applications.
Important Safety Notice: Thimbles are components and are not individually load-rated. The final strength of the wire rope assembly depends on the quality of the splice or swage. Work must be carried out by a competent person. Do not use for overhead lifting.
Technical Specifications
The following table outlines the key dimensions for our range of galvanised commercial pattern wire rope thimbles. The wire diameter listed is the recommended size for a correct fit.
| WIRE DIAMETER |
LENGTH (L) |
WIDTH (W) |
|---|---|---|
| 3-4mm | 21mm | 13mm |
| 5mm | 23mm | 14mm |
| 6mm | 25mm | 16mm |
| 8mm | 31mm | 20mm |
| 10mm | 39mm | 23mm |
| 12mm | 44mm | 28mm |
| 16mm | 58mm | 36mm |
| 18mm | 64mm | 40mm |
| 20-22mm | 78mm | 48mm |
| 24-26mm | 78mm | 48mm |
Important Safety Notice: The information provided is for guidance and reference purposes only. Dimensions and specifications are approximate and subject to manufacturing tolerances. Top This product is NOT individually load-rated and is not suitable for lifting, overhead lifting, or any safety-critical applications. The final strength of any assembly depends on the quality of the splice or swage, which must be carried out by a competent person. A competent person must determine the suitability of this product for any given application. Deacon Products (part of Deacon Wire Rope Ltd) assumes no liability for the misuse or misapplication of this information or our products.