Product Overview
Our Galvanised Jaw & Jaw Rigging Screws are a standard, commercial-grade solution for tensioning wire rope rigging, bracing systems, and general-purpose applications. Manufactured from steel and finished with a robust Hot Dip Galvanised (HDG) coating, they offer excellent durability and protection against corrosion in outdoor environments. The closed body design protects the threads from dirt and damage, while the jaw-end fittings (clevis fittings) provide a secure connection point for attaching to plates or other hardware using the removable pin. Rotating the central body draws both jaw bolts inwards, applying tension to the assembly.
Important Safety Notice: These rigging screws are not load rated for lifting applications. They are designed for general tensioning, bracing, and non-critical suspension only. Do not use for overhead lifting or any safety-critical application.
Technical Specifications
The following table outlines the key dimensions for our range of galvanised jaw & jaw rigging screws.
| D (THREAD DIAMETER) |
L (BODY LENGTH) |
W (JAW WIDTH) |
|---|---|---|
| M6 | 100mm | 7mm |
| M8 | 110mm | 9mm |
| M10 | 150mm | 10mm |
| M12 | 195mm | 13mm |
| M16 | 230mm | 18mm |
| M20 | 270mm | 21mm |
| M22 | 295mm | 24mm |
| M24 | 325mm | 29mm |
Important Safety Notice: The information provided is for guidance and reference purposes only. Dimensions and specifications are approximate and subject to manufacturing tolerances. These rigging screws are not load rated for lifting and must not be used for overhead lifting or any safety-critical applications. They are designed for general tensioning, bracing, and non-critical suspension only. A competent person must determine the suitability of this product for any given application. Deacon Products assumes no liability for the misuse or misapplication of this information or our products.