Product Overview
Our Self Colour Large Dee Shackles are manufactured to British Standard 3032, ensuring a reliable and certified component for lifting operations. These shackles are supplied in an untreated, self-colour finish, making them suitable for welding or for applications where a galvanised coating is undesirable. They feature a "large" dee profile, providing a more generous jaw width for accommodating thicker slings.
Important Safety Notice: These shackles are load-rated for lifting. The Working Load Limit (W.L.L.) / Safe Working Load (S.W.L.) is clearly marked and must not be exceeded. Always inspect shackles for wear, damage, or deformation before each use. For overhead lifting, ensure pins are correctly and securely fastened.
Technical Specifications
The following table outlines the key dimensions and Safe Working Loads (S.W.L.) for our range of B.S. 3032 self-colour large dee shackles.
| D (MATERIAL DIAMETER) |
D (PIN DIAMETER) |
L (LENGTH) |
W (WIDTH) |
S.W.L. |
|---|---|---|---|---|
| 3/8" | 1/2" | 38mm | 19mm | 0.50T |
| 1/2" | 5/8" | 54mm | 29mm | 0.75T |
| 5/8" | 3/4" | 64mm | 32mm | 1.50T |
| 3/4" | 7/8" | 73mm | 38mm | 2.00T |
| 7/8" | 1" | 83mm | 44mm | 3.00T |
| 1" | 1 1/8" | 95mm | 50mm | 3.75T |
| 1 1/8" | 1 1/4" | 105mm | 54mm | 5.00T |
Important Safety Notice: The information provided is for guidance and reference purposes only. Dimensions and specifications are approximate and subject to manufacturing tolerances. This product is intended for lifting applications and must be used in accordance with LOLER (Lifting Operations and Lifting Equipment Regulations) and other relevant safety standards. The Working Load Limit (W.L.L.) / Safe Working Load (S.W.L.) must not be exceeded. A competent person must determine the suitability of this product for any given application. All shackles and lifting components must be thoroughly inspected by a competent person before each use. Deacon Products assumes no liability for the misuse or misapplication of this information or our products.