Product Overview
Our Stainless Steel Swage Eye Terminals are a high-quality, reliable solution for terminating stainless steel wire rope. Manufactured from A4 (316) marine-grade stainless steel, they offer a clean, professional finish and excellent corrosion resistance. These fittings are designed to be permanently pressed (swaged) onto the wire rope, creating a strong eye that is ideal for stainless steel balustrading, marine rigging, and architectural applications.
Important Safety Notice: These terminals are not rated for lifting applications. They are designed for balustrading, rigging, and tensioning applications only. Do not use for overhead lifting or any safety-critical application. Swaging must be performed by a competent person with the correct equipment.
Technical Specifications
The following table outlines the key dimensions for our range of stainless steel swage eye terminals.
| WIRE DIAMETER |
EYE SIZE (E) |
OVERALL LENGTH (L) |
EYE WIDTH (W) |
|---|---|---|---|
| 3mm | 6.5mm | 55mm | 14mm |
| 4mm | 8.5mm | 65mm | 18mm |
| 5mm | 10mm | 80mm | 22mm |
| 6mm | 12.5mm | 94mm | 28mm |
| 7mm | 12.7mm | 105mm | 28mm |
| 8mm | 14.5mm | 124mm | 32mm |
| 10mm | 16.4mm | 142mm | 36mm |
| 12mm | 19.3mm | 160mm | 40mm |
Important Safety Notice: The information provided is for guidance and reference purposes only. Dimensions and specifications are approximate and subject to manufacturing tolerances. This product is NOT load-rated and is not suitable for lifting, overhead lifting, or any safety-critical applications. It is intended for general purpose, non-critical, or securing applications only. A competent person must determine the suitability of this product for any given application. Swaging must be performed by a competent person with the correct equipment. Deacon Products assumes no liability for the misuse or misapplication of this information or our products.