Product Overview
Our Stainless Steel Swage Toggle Jaw Terminals are a versatile solution for balustrade and rigging applications. The swage end is hydraulically pressed to the wire rope, while the jaw (fork) end connects to an eye bolt or mounting plate. The key feature is the articulating toggle, which allows the fitting to pivot and accommodate angles, making it perfect for staircases or non-level runs where misalignment is a factor. Manufactured from A4 (316) marine-grade stainless steel for maximum corrosion resistance.
Important Safety Notice: These terminals are not rated for lifting applications. They are designed for balustrading, rigging, and tensioning applications only. Do not use for overhead lifting or any safety-critical application. Swaging must be performed by a competent person with the correct equipment.
Technical Specifications
The following table outlines the key dimensions for our range of stainless steel swage toggle jaw/fork terminals.
| WIRE DIAMETER |
PIN DIAMETER (D) |
LENGTH (L) |
JAW WIDTH (W) |
|---|---|---|---|
| 3mm | 6mm | 75mm | 7mm |
| 4mm | 8mm | 89mm | 10mm |
| 5mm | 9mm | 104mm | 12mm |
| 6mm | 12mm | 127mm | 13mm |
| 8mm | 16mm | 163mm | 17mm |
Important Safety Notice: The information provided is for guidance and reference purposes only. Dimensions and specifications are approximate and subject to manufacturing tolerances. This product is NOT load-rated and is not suitable for lifting, overhead lifting, or any safety-critical applications. It is intended for general purpose, non-critical, or securing applications only. A competent person must determine the suitability of this product for any given application. Swaging must be performed by a competent person with the correct equipment. Deacon Products (part of Deacon Wire Rope Ltd) assumes no liability for the misuse or misapplication of this information or our products.