Stainless Steel Swage Toggle Jaw (Fork) Terminal
A marine-grade swage terminal with an articulating toggle jaw for angled connections.
A4 (316) Stainless Steel
Manufactured from A4 (316) marine-grade stainless steel for superior corrosion resistance in harsh environments.
Swage Termination
Designed to be permanently attached to wire rope using a hydraulic swaging press, creating a strong and slimline end fitting.
Articulating Toggle Jaw
Features a toggle jaw (fork) that can articulate, allowing for connections to be made at an angle and reducing stress on the fitting.
Product Overview
Our Stainless Steel Swage Toggle Jaw Terminals are a versatile solution for balustrade and rigging applications. The swage end is hydraulically pressed to the wire rope, while the jaw (fork) end connects to an eye bolt or mounting plate. The key feature is the articulating toggle, which allows the fitting to pivot and accommodate angles, making it perfect for staircases or non-level runs where misalignment is a factor. Manufactured from A4 (316) marine-grade stainless steel for maximum corrosion resistance.
Important Safety Notice: These terminals are not rated for lifting applications. They are designed for balustrading, rigging, and tensioning applications only. Do not use for overhead lifting or any safety-critical application. Swaging must be performed by a competent person with the correct equipment.
Specifications
| Part Code | Wire Diameter | Pin Diameter (D) | Length (L) | Jaw Width (W) |
|---|---|---|---|---|
| SSSTJT03 | 3mm | 6mm | 75mm | 7mm |
| SSSTJT04 | 4mm | 8mm | 89mm | 10mm |
| SSSTJT05 | 5mm | 9mm | 104mm | 12mm |
| SSSTJT06 | 6mm | 12mm | 127mm | 13mm |
| SSSTJT08 | 8mm | 16mm | 163mm | 17mm |
Product Datasheet
Download the datasheet for this product.
